RX-8 ECU Remapping Stage 2 FI Turbo 03-12

RX-8 ECU Remapping Stage 2 FI Turbo 03-12

For all Mazda RX-8  OEM ECU or Haltech, Adaptronic,Link series 1 incl. Kuro & series 2 R3 by Year 2003-2012.
Requirement for Stage 2 FI (Forced Induction) is a turbo or compressor setup.

The Stage 2 FI tuning includes:

01. MAF / MAP calibration

02. Fuel maps optimization

03. Ignition maps optimization

04. Elimination the high cold-start peak engine rpm during starting process
 
05. Lowering the idle rpm when the engine is cold

06. Setting idle rpm

07. Cold start limiter set to 2800 rpm / 80 ° C water temperature (or desired rpm)
      Instead Series 5500 rpm / 20 ° C

08. Optimizing and increasing the oil injection amount

09. Lowering the cut-in temps cooling fan 1 & 2

10. Elimination of the dangerous engine lean run in the partial load range at 3500-5500 rpm all gears - The famous catalize killer

11. Adjustment of installed performance coils included.

12. Elimination of inertia accelerator, similar accelerator Booster
 
Tuning on fuel Super Plus 100 or 102 octane or E85!

Time required for Stage 2 with log drives and individual programming about 2 days.

Please ask us for further informations.