Main page » RX-8 SE » ECU Re-Mapping » RX-8 ECU Remapping Stage 0 Engine Protection All Years

RX-8 ECU Remapping Stage 0 Engine Protection All Years

Description

RX-8 ECU Remapping Stage 0 Engine Protection 03-12
Optimizing after making an appointment or you can also send the ecu to us.
If the shipping option to us is only the ECUs from 2003-2008 of the series 1. Facelift and R3 only via appointment at our location.
Please click corresponding.

For all Mazda RX-8 Series 1, incl. Kuro, Series 2 R3 all years, 4Port 192HP(141kW) or 6Port 231HP(170kW).

The Stage 0 Engine Protection includes:

1. Elimination high revving the engine during cold start cranking.

2. Lowering the high idle speed rpm when the engine is cold.

3. Setting idle

4. Cold start limiter set to your wish rpm.

5. Increasing the oil injection amount.

6. Lowering the switch on temps cooling fan 1 & 2.

7. Elimination of dangerous lean running engine at part load all gears - The well known catalizer killer.

8. Adjustment of installed performance coils included.

NEW 9. ECO adjustment to approx. 4000 rpm for more efficiency and performance.

Elimination of DTCs included.

Time required for Stage 0 with eventually log drives and programming about 1 hour.

Product Safety Information
Responsible Person in the EU
Wankelshop
Ayinger Str. 1
85653 Aying, Germany
ask@wankelshop.com

Customers who bought this product bought also the following products:

Idemitsu Rotary Engine Oil 10W30 946ml

With the precise synthetic base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals.

Allows for better sealing of the chamber, facilitating more power generation.

Extends the life of turbochargers by reducing bearing coking.

Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.

Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft. reducing metal-to-metal contact and minimizing bearing wear.

Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact. thereby increasing main bearing wear.

Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output.

For bulk buyers 1 carton consists of 12 bottles.

20,92 EUR
22,11 EUR per Liter

Idemitsu Racing Rotary Fuel Lube Premix 946ml

The Idemitsu Racing Rotary Fuel Lube Premix is added to the gasoline fuel.
The full synthetic Idemitsu Racing Rotary Fuel Lube Premix provides additional lubrication for apex and side seals, which extends the life of the seals and increases the efficiency of the rotary engine.

In addition, allow special additives adapted to rotary engines better sealing of the chambers, causing the engine runs noticeably quieter and thus more power can unfolded.
A formulation of synthetic base oils reduces all deposits and carbonization at the engine outlet.
Dispersive additives keep clean the injectors and reduce wear to a minimum. Proven mixing ratio ranges are 1:100 - 1:150 for racing and 1:200 - 1:300 for daily drive.
For an optimal mixing, fill in the premix oil before refueling.

For bulk buyers 1 carton consists of 12 bottles.

16,92 EUR
17,89 EUR per Liter