Main page » ACCESSOIRES » STICKER » RE DECALS Eat Sleep Brap

RE DECALS Eat Sleep Brap

Description

Dimensions approx L250mm x B62mm

The sticker has a transfer sheet. i.e. after bonding remains only the pure motive or the lettering stand (without background), ideal for sticking on your car!

The sticker can be applied to windows. car bodywork, plastic. tiles, furniture. etc., and may at any time be removed without trace.

Before gluing please clean the surface thoroughly and degrease if necessary. The optimum temperature for the attachment of the label is 15 to 25 degrees!

Simply peel off the paper-like protector of the label carefully, attach the label to the desired location and press with a clean dry cloth or even better doctor, all points of the transfer sheet firmly on the ground. Then gently pull off the transfer sheet so that only the subject stops. For complicated designs it is advisable to stick to work with wet and squeegee.

Please following the label is to perform 2-3 days no car wash, so the sticker adheres well.
After the sticker is durable and washes temparaturbeständig and weatherproof.

The liability of the sticker inside is unlimited, outdoors it is several years.

Customers who bought this product bought also the following products:

Idemitsu Racing Rotary Fuel Lube Premix 946ml

The Idemitsu Racing Rotary Fuel Lube Premix is added to the gasoline fuel.
The full synthetic Idemitsu Racing Rotary Fuel Lube Premix provides additional lubrication for apex and side seals, which extends the life of the seals and increases the efficiency of the rotary engine.

In addition, allow special additives adapted to rotary engines better sealing of the chambers, causing the engine runs noticeably quieter and thus more power can unfolded.
A formulation of synthetic base oils reduces all deposits and carbonization at the engine outlet.
Dispersive additives keep clean the injectors and reduce wear to a minimum. Proven mixing ratio ranges are 1:100 - 1:150 for racing and 1:200 - 1:300 for daily drive.
For an optimal mixing, fill in the premix oil before refueling.

For bulk buyers 1 carton consists of 12 bottles.

14,99 EUR
15,85 EUR per Liter

Idemitsu Rotary Engine Oil 10W30 946ml

With the precise synthetic base oil mix of PolyAlphaOlephins and PolyEsters, Idemitsu Rotary Engine Oils are able to minimize those deposits on your apex seals.

Allows for better sealing of the chamber, facilitating more power generation.

Extends the life of turbochargers by reducing bearing coking.

Specially developed additives facilitate even tooth load on the front stationary gear to allow for higher loads and higher RPM.

Premium anti-wear agents create a strong film between the main bearings and the eccentric shaft. reducing metal-to-metal contact and minimizing bearing wear.

Developed to reduce entrained gas generation. Entrained gases reduce the oils ability to prevent metal-on-metal contact. thereby increasing main bearing wear.

Includes Molybdenum as a friction modifier. This compound reacts with the metal surfaces to create a low-shear boundary. The low shear characteristic reduces friction, increasing efficiency and power output.

For bulk buyers 1 carton consists of 12 bottles.

19,99 EUR
21,13 EUR per Liter